Plumbing Fixture:
Zero Radius Sinks
★ Bowl, Faucet, Radius, RevitComponents, Sink, Zero
TURN YOUR SINK INTO A “TOXIC ENERGY DRAWING CONTAINER” >>
what you’ll need:
SINK STOPPER
GROUNDED WATER
PLYWOOD (3/8″THICK+)
DRILL + FORSTNER BIT (1 1/8″)
SILICONE SEALANT
(4) 3′ LONG, 1″ DIA. STEEL TUBES
Insert the stopper to seal the deal
Add clean grounded water into the bowl(s) until reaching the half-way point
Cut your wood to fit the inside dimension of the sink edges
Drill four 1 1/8″ diameter holes into the plywood, allowing at least 3″ of space between the holes
Cap the bowl(s) with fabricated plywood
Insert the 3′ long steel tubes into the holes, so that their ends penetrate the surface of the water.
Apply silicone to seal any gaps.
what you’ll need:
SINK STOPPER
GROUNDED WATER
PLYWOOD (3/8″THICK+)
DRILL + FORSTNER BIT (1 1/8″)
SILICONE SEALANT
(4) 3′ LONG, 1″ DIA. STEEL TUBES
Insert the stopper to seal the deal
Add clean grounded water into the bowl(s) until reaching the half-way point
Cut your wood to fit the inside dimension of the sink edges
Drill four 1 1/8″ diameter holes into the plywood, allowing at least 3″ of space between the holes
Cap the bowl(s) with fabricated plywood
Insert the 3′ long steel tubes into the holes, so that their ends penetrate the surface of the water.
Apply silicone to seal any gaps.
We have spent a great deal of time in front of computer screens to create and deliver free high quality Revit content. If you have benefited from our models and/or would like to contribute to the RevitComponents cause, your donations are greatly appreciated. Thank you!
Muchas gracias!!!!, estan muy buenos, me serviran mucho!!!
kind regards